"Ramsey 3000-Lb. Wireless ATV Winch, Model# ATV3000" @ Tools and Equipment online store

"Industrial-quality roof rake helps prevent ice dams and snow loading. Razor head made of 3/16in. aluminum flat stock, is 36in. wide and 6in. high. Lightweight aluminumhandle is 24ft. long (four 6ft. snap-together sections). 10ft. slide chute attaches with bungee cord to the third handle section. Poly wheels keep the head frame above the surface. U.S.A. The double-cutting surfaces of the Roof Razor roof rake head allows the Roof Razor to remove snow by undercutting deep or drifted snowSnow collapses by its own weight onto the chute and slides off the roofPoly wheels keep the roof above the surface, preventing damage to shinglesA simple push is all that is needed to clean snow off your roofGravity is doing all the workManufactured from tough aluminum and steelAble to endure severe winter climates and withstand temperatures as low as 40° below zeroU.S.A.Model RRCOMP"

Manufacturer: RoofRazor
SKU: 150800
Category: Snow + Ice Removal

"Ready Ratchet Self-Storing Socket System — 3/8in. Drive, Metric"

"A high–torque ratchet with a hardened–steel drive mechanism and quick–release button features a hollow handle for storing 7 chrome vanadium sockets. Simply open the end cap for easy access to the snap–in socket trayand choose your socket. Sizes include 10, 11, 13, 14, 15, 17 and 19mm. Limited lifetime warranty."

Manufacturer: Northern Tool and Equipment
SKU: 558683
Category: Hand Tools

---

"Milwaukee 4-Tool Combination Kit — 28 Volt, Model# 0928-29"

"The ultimate combo kit for those who demand extreme power, superior performance and the longest running cordless tools. Kit features the revolutionary28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The V28™ battery pack delivers two ti"

Manufacturer: Milwaukee
SKU: 3300928
Category: Power Tools

---

Wilmar Hydraulic Valve Lifter Remover With Locking Collet

Enables most hydraulic valve tappets to be removed. Spreadable collet locks ontolifter. Fits through push rod holes and expands to pull lifter out of bore.

Manufacturer: Northern Tool and Equipment
SKU: 909350
Category: Automotive

---

"Uvex Dual Lens Goggles, Model# 52229"

Duallens antifog goggles with lasergold-tinted lenses. Wide strap prevents goggles from slipping off helmet.

Manufacturer: Northern Tool and Equipment
SKU: 135730
Category: "Go-Karts, Mini-Bikes + Scooters"

---

Hydraulic Pump Mounting Bracket

"With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cas aluminum. Fit our pumps 1012, 1053 and 1056. Bracket Length: 4 7/8in. Bolt Circle:6 1/2in. Fits: 10, 11, 16 and 18 HP Briggs STD or IC/IP Fits: 6 and 8 HP Kohler"

Manufacturer: Northern Tool and Equipment
SKU: 3033
Category: Hydraulics

---

"Steel Bookcase — 36in.W x 52in.H, Model# ABC5218"

Shelf spacing is designed to accommodate large binders. 3adjustable shelves. Steel welded construction. Truck ship. U.S.A. Factory shipped. 36in.W x 18in.D x 52in.H3 adjustable shelvesSteelU.S.A.Model ABC5218

Manufacturer: Northern Tool and Equipment
SKU: 1521692
Category: Storage

---

"Zareba Systems Poly Tape Tensioner, Model# WPT4UT"

"Use as a poly tape tensioner, in-line tensioner or corner insulator. Ideal for direction changes greater than 10 degrees up anddown hill. Includes screws. 1-year limited warranty. U.S.A."

Manufacturer: Zareba
SKU: 254026
Category: Ag Equipment + Excavating

---

Throttle Control Cable

"Fits twist grip #1380 & #13801. 50in. housing, 54in.cable. Barrel end."

Manufacturer: Northern Tool and Equipment
SKU: 1382
Category: "Go-Karts, Mini-Bikes + Scooters"

---

Valley Instrument 2 1/2in. 0-30 PSI Stainless Steel Bottom-Mount Gauge

"Designed for use with any medium not corrosive to stainless steel. Stainless steel movement with 316 stainless steel Bourdon tube. 1/4 MNPT316 stainless connection. 304 stainless steel case. Grade B accuracy. Black enameled aluminum pointer, white aluminum dial and polycarbonate window. Glycerin filled. Range (PSI) 0-30"

Manufacturer: Valley Instruments
SKU: 53774
Category: Gauges

---

Howse 3-Point Disc Harrow — 6ft. Width

"Welded frame is constructed of 2 1/2in. x 2 1/2in. angle iron with cast bearings,1in. square axles and 16in. notched blades. Truck ship. U.S.A. 20 blades Recommended 15-35 HP"

Manufacturer: Howse
SKU: 2501826
Category: Ag Equipment + Excavating

---

"Vestil Dockboard — 14,000 lbs., 60in. X 48in."

"Provides unparalleled strength and performance. Engineered bend to keep edges flush withdock or truck. Safety yellow, E-Z grip curbs help prevent run-offs and provide visible driving lane. Positive traction treadplate for safe, speedy operations. Welded curb construction for maximum durability. Ships by truck only. Max. Height Difference is 7in. Dimensions 60in.W x 48in.L. Truck Ship. U.S.A. Model# BTA-14006048"

Manufacturer: Vestil
SKU: 143072
Category: Material Handling

---

Northern Industrial Tools 8–Pc. Wood Chisel Set

"Durable chrome vanadium steel blades in sizes 1/4"" to 1 1¬2in. Handles are durable PVC. Comes with 8in. x 2in. x 1in. shaping stone and 1/8in.–3in. range honingguide. Includes storage case. Limited lifetime warranty."

Manufacturer: Northern Industrial Tools
SKU: 558412
Category: Hand Tools

---

"Quantum Storage Stack and Nest Tote Bin — 18in. x 11in. x 6in. Size, Red"

"These heavy-duty, tough and dependable stack-and-nest totes are the ultimate reusable container for storage and transporting your valuable items in any application. These proven containers are available in nine sizesand three colors for efficiency and inventory control. U.S.A Bin size 18in x 11in x 6in Capacity .50 Cu. Ft. Red"

Manufacturer: Quantum
SKU: 278590R
Category: Storage

---

"Quantum Storage Giant Stack Container — 10 7/8in.W x 17 1/2in.D x 12 1/2in.H, Red"

"Durable high-density polyethylene space saving bins. Holds up to 100 lbs. Features a label holder to identify stock. Chemical resistant. Hopper front, ensures easy access. U.S.A. 10 7/8in.Wx 17 1/2in.D x 12 1/2in.HRed"

Manufacturer: Quantum
SKU: 278260R
Category: Storage

---

"Earthway Walk Behind Ice Melt Spreader — 65-Lb. Capacity, Model# 2030PI"

"High-volume drop system is designed specifically for spreading ice melt and drysand. 65-lb. capacity rustproof hopper, 8in. pneumatic wheels and high-speed gearbox for wide, even spread widths. U.S.A."

Manufacturer: EarthWay
SKU: 25549
Category: Snow + Ice Removal

---

"Agri-Fab Carry All Yard Cart — 600-Lb. Capacity, Model# 45-0394"

"Agri-Fab garden carts are perfect for moving flowers, shrubs, tolls and other materials around the yard. They easily haul and dump firewood, topsoil and yard waste. Easy grip handles make for effortless work. 1-year limited warranty. 11 cu. ft. stable cart16in. “flat free” tires3/4in. dia. axleRustproof seamless bedEasy maneuverabilityEasy dumpingComfortable rubber hand gripEasy assemblyModel 45-0394"

Manufacturer: Agri-Fab
SKU: 254303
Category: Grounds Maintenance

---

"DEWALT Pilot Point Gold Ferrous Oxide Drill Bit — 15/64In., Model# DW1915"

"Pilot Point tip starts on contact, drillsclean, accurate holes and reduces burrs that cause lock-up on breakthrough. Tapered web provides greater durability to reduce breakage. No-spin shank means no bit spinning in the chuck. Size markings located above the shank to prevent wearing away. For drilling wood or metal. 15/64in. U.S.A."

Manufacturer: DEWALT
SKU: 399902
Category: Power Tools

---

Northern Industrial Tools Suction Lifter — 330lb. Capacity

"Heavy duty multi-purpose suction lifter Single suction structure, high density aluminum alloy Adjustable suction cup allows increased adhesion Includes plasticcase."

Manufacturer: Northern Tool and Equipment
SKU: 144761
Category: Automotive

---

Buyers Tailgate Spreader Mount

"Fits our spreader item#s 10389 and 103897. Factory shipped. Fits most pickups, all tailgate widthsFor a 2in. receiver"

Manufacturer: Buyers
SKU: 103892
Category: Snow + Ice Removal

---

Lisle Magnetic Socket Holder — 1/4in. Drive Sockets

Heavy duty magnets and customtray securely hold metric and SAE sockets up to 5/8in. or 15mm. Magnetic back. With case. U.S.A.

Manufacturer: Lisle
SKU: 110120
Category: Hand Tools

---

CAT 140H Motor Grader Die-Cast Collectible — 1:50 Scale

"Model is full of moving parts! Drawbar,circle and moldboard all move; ripper-scarifier raises and lowers. Front wheel steering and axle articulation. 1:50 scale. Die cast metal. Dimensions: 7 5/8in. L x 2in. W x 2 1/2in. H Wheels are plastic"

Manufacturer: CAT
SKU: 199303
Category: Die-Cast Collectibles

---

"Triton Products BinKit — 6 Bins, 10 7/8in.W x 11in.D x 5in.H each"

A total plastic hanging bin system that enables users to store small tools and loose parts anywhere on 1/8in. or 1/4in. pegboards. Includes bin clips. U.S.A. 2-year limitedwarranty. 6 bins10 7/8in.W x 11in.D x 5in.H bin sizeIncludes 18 clips for mounting

Manufacturer: Triton Products
SKU: 257908
Category: Storage

---

Mossi Full-Face Helmet — Green — Small

"Lightweight full-face helmet has tough, impact-resistant thermoplastic shell. DOT approved.For go-karts, ATVs and scooters. Green, Small. Comes with single lens shield. Optional dual lens shield Item# 135728 available for cold weather use, sold separately."

Manufacturer: Mossi
SKU: 135716
Category: "Go-Karts, Mini-Bikes + Scooters"

---

Power Probe Circuit Tester

"Unique tool serves many functions such as test light, continuity tester and jumper lead set. Determines good/bad ground in seconds and includes power feature which allows you to test lights, fuel pumps, etc. before you remove them. Made in the U.S.A.Special Features Include: Connectors for battery hook-up clips, extension cableand cigarette lighter adapter LED lights Red when contacting a positive circuit LED lights Green when contacting a negative circuit LED lights Orange when contacting an alternating circuit LED does NOT light at all when contacting an open circuit Continuity is indicated by the LED lighting Green Switch pressed Rearwards lights the LED Green and conducts negative voltage to tip. Switch pressed Forward lights the LED Red and conducts positive voltage to tip. If the Power Probe is short circuited, the circuit breaker trips, protecting the unit."

Manufacturer: Power Probe
SKU: 1638710
Category: Automotive

---

"Sand/Salt Spreader — 2ft. Stainless Steel Hopper, Model# DS-0302"

"Spreaders have complete 12in. chain conveyors. Adjustable pattern from 4ft. to 30ft. The 1/3 yard, 2ft. units work with 2in. receiver and 3-point mount applications. The 1/3 yard, 4ft. units can be used on a flat bed utility vehicle or truck bed. The 2/3 yard units are for truck bed use only. The 4ft. units come with 4 tie-down straps; the 2ft. units come with 2 straps. Truck Ship. U.S.A. Construction: Stainless SteelCapacity: 1/3 YardHopper Length: 2ft."

Manufacturer: Northern Tool and Equipment
SKU: 103881
Category: Snow + Ice Removal

---

"CAT® Steel Toe Work Boots — Size 8 1/2, Medium Width"

"Sturdy work boot features oiled full-grain leather upper, nylon mesh lining, Climasphere™ insole. Electrical hazardrated, slip- and oil-resistant outsole. OSHA and ANSI approved steel toe. Size 8 1/2Medium Width"

Manufacturer: CAT
SKU: 202203
Category: Gloves + Apparel

---

Racking Beam — 96in. Length

One-piece tube seamed step beam. Longer racking beam with a weight capacity of 1155 lbs. per pair. Truck ship. U.S.A. Sold singally; must order two per shelf2 1/4in. H BeamRoll Formed 14 Gauge Steel

Manufacturer: USP
SKU: 143948
Category: Storage

---

Ingersoll-Rand Air Compressor Start Up Kit — Model# 20103420

"For use with our Item# 1592050. Extends compressor warranty to two years and contains the parts to correctly start up and maintain your compressor for the first year. T30 select lubricant, air filter element, engine air filter,oil filter and engine oil. U.S.A."

Manufacturer: Ingersoll-Rand
SKU: 1592051
Category: Air Compressors

---

"MetalAce 22B English Wheel, Model# 22B"

"Suitable and economical for small metal–crafting jobs like motorcycle gas tanks, art or hobby projects, and small fillets for aircraft applications to forming steel and sheetmetal and aluminum. Can be bench mounted or mounted on optional welded floor stand Item# 144452 (sold separately) to give it a working height of 42.75 in. Capacity is 16–gauge steel and 3/32 in. aluminum. Can be rolled into the center of a 44 in. panel (22 in. throat). Comes with 1 anvil wheel 2 in. x 3 in. x 2.375 in. radius. Other 2 in. x 3 in. anvil radius wheelssold separately. Upper wheel is 2 in. x 8 in. dia. 1045 steel billet polished with a 63 surface finish. Overall size is 27 in.W x 29 in.H witha working height of 16 1/2 in. from bench top. Truck ship. U.S.A. Factory shipped."

Manufacturer: MetalAce
SKU: 144446
Category: Metal Fabrication

---

"Honda OEM Engine Maintenance Kit — Fits Item#s 6059, 605921, 605913, 60597, 60596, 60591, 60593 & 6067, Model# HONDAKIT3"

"Honda OEM engine maintenance kit includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and insructions. Consult Honda engine owners manual for maintenance instructions, or download from Honda Internet site if owners manual no longer exists. U.S.A. For use with Honda engines: GX110 and GX120 with cyclone air filter and GX140, GX160 & GX200with standard or cyclone air filterFits Item#s 6059, 605921, 605913, 60597, 60596, 60591, 60593 & 6067"

Manufacturer: Honda Engines
SKU: 701173
Category: Engines

---

"Ingersoll-Rand Air Hammer — 3 1/2in. Stroke, 2000 BPM, 3 CFM, 90 PSI, Model# 117K"

"Standard duty air hammer kit forbolt cutting, exhaust and front end work. U.S.A 2000 BPM @ 90 PSI3/8in. minimum hose size3 1/2 strokeShank opening: .401in.Bore diameter: 11/16in.3 CFM average air consumption14 CFM @ load1/4in. NPT inlet9.9in.L overallIncludes 5 chisels: Edging tool, Tail pipe cutter, Straight chisel D Cutting chisel"

Manufacturer: Ingersoll-Rand
SKU: 154146
Category: Air Tools

---

Northern Industrial 15mm Standard Socket — 1/2in. Drive

1/2in. drive chromevanadium 15mm standard socket.

Manufacturer: Northern Industrial Tools
SKU: 558166
Category: Hand Tools

---

"Leeson Reversible Electric Motor — 3/4 HP, 1725 RPM"

"3/4 HP general purpose motor has NEMA frame #S56, and rigid base. Also featurescapacitor start and 115/208-230 Volts. Single phase motor with FL amps 230V-5.4. Shaft size is 1 7/8in. x 5/8in.. No overload protection. U.S.A."

Manufacturer: Leeson
SKU: 16117751
Category: Electrical

---

SK 103-Pc. Automotive Starter Tool Set — Model# VTS 03204

"Contains 74 sockets in SAE and metric sizes, standard and deep in 1/4in. and 3/8in. drives, 9 drive tools and attachments,14 SuperKrome SAE and metric wrenches, 2 screwdrivers, 2 pliers and goggles. Includes 26in. yellow tool box. Lifetime limited warranty. U.S.A. 74 sockets in SAE and metric sizes, standard and deep in 1/4in. and 3/8in. drives9 drive tools and attachments14 SuperKrome SAE and metric wrenches2 screwdrivers2 pliersGoggles26in. yellow tool boxLifetime limited warrantyModel# VTS 03204U.S.A."

SKU: 2503204
Category: Hand Tools

---

Buyers Products Hydraulic Suction Hose — 1in. x 180in.

1in.inner diameter x 180in. long. 100R4. Internally reinforced suction/return line hose. U.S.A.

Manufacturer: Buyers
SKU: 109005
Category: Hydraulics

---

Giant Stacking Bins Store and Move Large Parts

"Really tough! Injection moldedfrom high density polyethylene, these big bins have extra heavy, double-thick walls that allow you to stack up to 200 pounds of tools, merchandise, parts and other cargo. Hopper front allows easy access. Bins can withstand temps ranging from -40°F to +250°F. Not affected by water, chemicals or solvents. Yellow or blue. The 29in.L bins have a spread bar for added strength. Yellow. U.S.A. Dimensions: 19 3/4in.L x 12 3/8in.W x 11 7/8in.H MAGNUM & QUANTUM"

Manufacturer: Northern Tool and Equipment
SKU: 178402
Category: Storage

---

Copperhead Cables Booster Cables — 10 gauge

"Patented clamp design accommodates both top and side post batteryterminals. Unlike alligator clamps, these 99.9% pure copper clamps require very little hand pressure to attach to terminals. Insulated cable remains flexible in extreme weather conditions. Ergonomic handles are chemical and impact resistant. Light–duty, 10–gauge cable12–ft. length250 Amp rating"

Manufacturer: Copperhead Cables
SKU: 1628
Category: Automotive

---

"Haldex High Pressure Hydraulic Gear Pump .517 Cu. In., Model# 1002968"

"Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers,compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Cubic Inch Size: .517 Flow at 1800 RPM: 4.0 Flow at 3600 RPM: 8.0 Maximum PSI Cont.: 2500 Maximum PSI Intmt.:2750 O-Ring Port Size, SAE: 7/8in.-14"

Manufacturer: Haldex Barnes Hydraulics
SKU: 10567
Category: Hydraulics

---

"DEWALT Heavy-Duty Cordless Hammerdrill/Reciprocating Saw Kit — 18 Volt, Model# DC988CA"

DC988 XRP™ 11/2in.8 Volt hammerdrill/drill/driver with 500 in.-lbs. of maximum torque and patented 3/speed all-metal transmissionDC385 XRP™ 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaftIncludes 1-hour chargerTwo 18V XRP™ batteries360° side handleHeavy-duty kit boxModel DC988CA

Manufacturer: DEWALT
SKU: 399519
Category: Power Tools

---

"Portable Hoist — 1,000 lbs."

"HereÜs a safer, easier way to LIFT or PULL heavy objects 10 feet. Use it for loading and unloadingequipment, pulling boats up on shore or yanking ATVs and snowmobiles out of deep mud, sand or snow. Use it for stretching wire and chain link fencing, lifting engines or moving fallen trees. Deer hunters use it for hoisting game. Handle folds for easy storage in the compact, heavy-duty case. Complete with 10-ft., 5/32in. aircraft-type cable."

Manufacturer: Northern Tool and Equipment
SKU: 14568
Category: Material Handling

---

May we also suggest the following products:

NorthStar 3000 PSI Variable Pressure Washer Nozzle

EconoMaster Halogen Light Bar — 53in. Length

"Northern Industrial Tools Air Drill — 3/8in. Chuck, 1800 RPM, 4 CFM, Reversible, Keyless"

CAT Construction Set Die-Cast Collectibles — 1:64 Scale

"Vestil Hydraulic Lift Table — 4,000 lbs., 48in x 48in.."

Northern Industrial 13mm Combination Wrench — Mirror Finish

"Master Lock High-Security Cable with U-Lock, Model# 8156DPS"

Roll of 3M™ Reflective Tape 50yds.

Best Construction Equipment Combo Blade Power Trowel — 5.5 HP

"Quantum Storage Double Sided Floor Stand Unit — 16in. x 23 5/8in. x 70in. Size, Gray"

"Best Construction Equipment Concrete and Pavement Saw — 11 HP, Model# 621100"

"Midland GMRS Handheld Radios (Pair) — 8-Mile Range, Model# LXT210"

Baby Cribs
© Copyright 2010. All rights reserved. | Dream Host promo code